Painting a wall may seem simple, but the final result is greatly influenced by the preparation and application techniques used. Small mistakes, such as skipping the surface preparation stage, can prevent the paint from adhering perfectly, resulting in an uneven finish that is even prone to damage.
By following the right steps, painting walls yourself at home is not difficult, and can even produce a neat appearance like professional work. Here are the steps for painting walls correctly, from surface preparation to the proper application technique.
Surface Preparation Before Painting
1. Clean the Wall Surface
Clean the wall surface of dust, dirt, and peeling old paint residue, because a dirty surface can prevent the new paint from adhering properly.
2. Patch Cracks or Holes
Patch cracks or holes using filler, then smooth it until it blends with the surrounding surface so it does not leave protruding areas after painting.
3. Sand Until Smooth
After the filler dries, sand the patched surface until it is level with the surrounding area, then clean off the sanding dust again before proceeding to the next stage.
The Importance of Primer Before the Color Coat
Before applying colored paint, the wall surface should first be given a primer coat. Primer helps improve the adhesion of the next paint layer while also making the surface more ready to receive colored paint.
Primer also helps equalize absorption on different surfaces. With more even absorption, colored paint can produce a more consistent appearance and reduce the possibility of areas appearing lighter or darker. This preparation also helps optimize the use of colored paint because the color layer is not immediately absorbed unevenly into the wall surface.
Paint Application Steps with the Right Roller Technique
1. Apply with a "W" Motion
Apply the paint using a roller with a "W" motion on a small area first, before spreading it evenly across the entire section without lifting the roller.
2. Spread Evenly Without Lifting the Roller
Spread the paint with an up-and-down motion without lifting the roller from the surface, so the paint result is more even and does not leave visible roller lines after drying.
3. Allow Time Between Coats
Allow drying time between coats according to weather conditions and room air circulation, before applying the next paint coat for maximum results.
Common Mistakes When Painting Walls That Must Be Avoided
The painting result is not only determined by the color choice, but also by the surface condition and how the paint is applied. A few simple mistakes during the painting process can make the final result less neat or affect the paint's adhesion. Here are some things to avoid:
1. Painting on a Surface That Is Still Dirty or Not Yet Dry
Make sure the wall surface is clean, dry, and ready to paint before starting to apply paint. Dust, dirt, or remaining moisture on the surface can interfere with the paint's adhesion so the resulting layer does not stick optimally.
2. Applying Paint Too Thickly
Avoid trying to get an immediately intense color by applying paint too thickly in one coat. A layer that is too thick can make the drying process take longer and risks producing an uneven final result. Under certain conditions, a paint layer that is too thick can also cause bubbles to appear on the surface.
It is better to apply paint evenly according to the product usage instructions and allow enough drying time before continuing to the next coat. This method helps produce a surface with a more even and neater color.
Avitex Wizz for a Neat Wall Result
Avitex Wizz is a wall paint choice that is suitable for both interior and exterior areas, helping produce a neat wall appearance after going through proper preparation and application.
Advantages of Avitex Wizz from Avian Brands:
-
Wide Coverage and Economical: Formulated with Super Cover Technology that reaches a wider wall surface so paint usage is much more economical.
-
Optimal and Flexible Consistency: Can be made 2x thicker and up to 40% thinning provides flexibility in application according to project needs.
-
Complete Packaging Size Options: Available in various packaging size variations ready to adjust to the scale of your home renovation project needs.
-
Superior Coverage: Able to cover imperfections on home walls with just two coats of paint.
-
Bright and Smooth Final Result: Produces a wall surface that is bright, smooth, and not easily dull.
-
Environmentally Friendly and Safe: Made without mercury and lead, thus ensuring safety for household residents.
A neat and long-lasting wall painting result is greatly influenced by surface preparation and the right application technique. Follow the steps above and use quality wall paint like Avitex Wizz from Avian Brands for optimal final results.
